Welcome to WatchTalkForum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

Sign in to follow this  
Elliot22

Setting the alarm for my Invicta 6207

Can anyone advise me on the way to set the alarm function for this watch - It is not apparently covered in the instruction manual and frustration is setting in

 

Any advice would be sincerely appreciated.

 

invicta6207_zpsd92f0d04.jpg

Share this post


Link to post
Share on other sites

I have the Invicta 6207, great watch, here is a short how to on setting the alarm

1. Unscrew crown and pull out to position 1

2. Turning the crown counter-clockwise  will move the Alarm hand. Turning the crown clockwise will adjust the day.

3. Screw the crown back in (must be screwed back in) and press the top pusher once and wait until alarm indicator goes to ON position. To turn off alarm press top indicator again. To turn alarm on crown can not be in position 1 because then the upper pusher is used to adjust the power indicator needle. Always turn on/off alarm when crown is screwed in.

Bottom pusher works for the GMT hand, if you hold it down it will advance fast.

Hope that helps

Share this post


Link to post
Share on other sites

I have the Invicta 6207, great watch, here is a short how to on setting the alarm

 

1. Unscrew crown and pull out to position 1

 

2. Turning the crown counter-clockwise  will move the Alarm hand. Turning the crown clockwise will adjust the day.

 

3. Screw the crown back in (must be screwed back in) and press the top pusher once and wait until alarm indicator goes to ON position. To turn off alarm press top indicator again. To turn alarm on crown can not be in position 1 because then the upper pusher is used to adjust the power indicator needle. Always turn on/off alarm when crown is screwed in.

 

Bottom pusher works for the GMT hand, if you hold it down it will advance fast.

 

Hope that helps

thanks for your kindly help

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this