Submariner ceramic bezel pushes in

[sam111 0]

 

I'm sure this question has been asked before but I cannot find it in this forum. So I apologize ahead of time. The bezel on my 2014 Rolex submariner pushes down like it is spring loaded. Is this normal? I just noticed it today. Thanks!!!

[Impeter 1]

 

Should not be spring loaded.

 

[Johnson 2]

 

There should be no up/down movement. Bezel should remain flush with the case of the watch.

 

[bombah 0]

 

So this is not normal? Thoughts???

 

[thMer2 0]

 

 

yes, it's fine. The bezel on the ceramics float on spring loaded ball-bearing with a spring pin click stop.

 

[Maaria 2]

 

I would not say that it is broke, but would expect the bezel to be flush with the case. For example, the bezels on my 14060 and 16710 are flush against the case. Neither of them move up/down the way yours does in the video. Now, my bezels are both aluminum - and not ceramic - but don't think that would necessarily make a difference as to proper fitment (in my opinion).

 

[Jason213 0]

 

Just did the same on mine and yes there's a tiny shifting down when I push the bezel as u did on your video...

 

[daytonaking 0]

 

he's talking about ceramic bezels, not aluminum bezels.... read my post.

 

[jamehjk 0]

 

My 114060 does the same, there's slight bit of play when pressed.

 

[Anderson 1]

 

This is normal. It's the same inall newer models ceramic subs.